€ 69.95
€ 76.27
Rinkinyje yra pagrindiniai ir būtiniausi elektronikos moduliai ir komponentai, reikalingi roboto sukūrimui.
Valdymo plokštė sukurta ARDUINO Leonardo pagrindu (ATmega32u4 mikrovaldiklis). Plokštėje yra 6 RJ25 lizdai sensoriams ir 2 RJ25 lizdai varikliams. Valdymo plokštė palaiko iki 5V/3A srovę, tai leidžia valdyti aukšto galingumo modulius, pvz. servo variklius ar LED lempučių juostas.
Su šiuo rinkiniu galite sukurti IR pulteliu valdomą robotą, liniją sekantį bei kliūčių išvengiantį robotą.
Elektronikos modulių prijungimą palengvina RJ25 jungtys, todėl visą laiką ir jėgas galima skirti savo įdėjų įgyvendinimui.
Rinkinio dalių sąrašas:
1 x Me-Baseboard
1 x Me-Ultrasonic Sensor
1 x Me-Line Finder
1 x Me-IR Receiver
1 x Me-IR Remote Controller
2 x 6P6C RJ25 cable-20cm
1 x 6P6C RJ25 cable-35cm
1 x USB 2.0 A-Male to Micro B-Male Cable
2 x Base Bracket
1 x Battery Holder for (6)AA
10 x Socket Cap Screw M4x8
4 x Nylon Stud M4*30
10 x Plastic Rivet R4060
4 x Plastic Rivet R4100
Pirkti
Susisiekti dėl likučio
€ 123.99
€ 174.23
Rinkinys skirtas lazerinio graviravimo funkcijai.
Tinka XY Plotter Robot Kit, mDrawbot Kit ir I 3D Printer Kit.
Graviruoti galima ant įvairių paviršių – plastiko/akrilo plokštės, medinės/popierinės lentos, džinso ir kt.
Dėmesio! Naudojantis lazeriu reikia saugoti odą ir akis! Vaikai iki 18 metų lazerį naudoti gali tik su suaugusiųjų priežiūra.
Laser Engraver Upgrade Pack is for XY Plotter Robot Kit V2.0, it can engrave by laser.
Note: The higher output power of the laser, the better processing capacity it is.
The 500mW laser engraver can do better engraving and cutting ability, it takes less time and more efficient than the 250mW laser engraving.
Follow the instruction, assembly the lasers elements to the assembled XY Plotter Robot Kit V2.0 and upload the firmware to the Me Baseboard. You can use Benbox Laser Engraver to control the laser engraver robot to engrave fabulous artworks.
For reference video as below: (https://www.youtube.com/watch?v=Y2Hj5XXX_hc).
Wavelength γ= 405nm Blue-Violet Laser 450~500mW semiconductor diode lasers elements
Working area: 300mm×350mm
Engrave accuracy:0.1mm
Suggested material
(1) suggested engrave material: wood board, colorful paper cards, dark opaque acrylic, etc.
(2) suggested cutter material: colorful paper cards, foam papers, etc.
Usage
For the places required engraving or cutter such as familes, hackerspaces, schools, companies, etc.
Minimum age:18 ages. Under the age of 18, please use under the care of their parents
Security
Pay attention when you’re operating the blue-violet laser MAKE SURE you’re wearing the goggles to avoid the dangers.
laser-engraver-upgrade-pack-for-xy-plotter-robot-kit-v2.0-warning-card.jpg
Additional accessories:
(1) A pair of blue-violet laser goggles. Goggles picture above is for reference only, please in kind prevail
(2) Several colorful paper cards
Optional materials
The laser tubes are also available.
Specification
Frame: Anodized aluminum
Physical Dimensions(L×W×H): 620mm × 620mm×140mm
Engrave materials: Wood boards, colorful paper cards, dark opaque acrylic, foam papers, etc.
Cutting materials: Colorful paper cards, foam papers, etc.
Working area (X×Y): 300mm×350mm
XY Resolution: 0.1mm
Max Speed: 50mm/s
Power: 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A
Software:Benbox Laser Engraver
Supports file type: JPG,PNG,BMP,GIF,DXF
Connections: USB
Electronics: Makeblock Me_baseboard
Useful Links
Instruction of Laser Engraver Upgrade Pack
laser-engraver-upgrade-pack-for-xy-plotter-robot-kit-v2.0-qrcode.png
Parts List
1 × Bracket 3x6
1 × HEX Screwdriver 2.5mm
1 × Cross Screwdriver 3mm
4 × Socket Cap Screw M4x8-Botton Head
4 × Countersunk Screw M3x8
5 × Nylon Cable Ties
1 × Motor Cable Jeck plug
1 × 450-500mW blue-violet Laser Components
1 × DC power cord 5.5*2.1MM
4 × Foot pads
Pirkti
Turime sandėlyje