Paieška

PoE šakotuvas 16-Portų, +uplink 2-Port RJ45 + 2-Port SFP, 135W Product Overview DH-PFS3218-16ET-135 is a 100 Mbps dual-port uplink unmanaged PoE switch. It supports functional DIP switch which provides port isolation, long distance power supply, PoE watchdog and QoS control. Featured with Gigabit uplink optical ports, it meets the need of long distance transmission. Applicable to small and micro-scale monitoring networks such as office desktops, schools, hotels, supermarkets, hospitals. Features: • Supports long distance PoE transmission. • Intelligent PoE. • Two-layer industrial PoE switch. • Innovative PoE Watchdog PD Alive. • Smooth Transmission. • MAC auto study and aging, MAC address list capacity is 8K. • Conform IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3z standards. • Supports PoE IEEE802.3af, IEEE802.3at, Hi-PoE standard. • Port isolation. • Industrial wide temperature design. Technical Specifications: • Model PFS3218-16ET-135. Ethernet Ports: • 1610/100Mbps RJ45 (PoE). • 210/100/1000Mbps RJ45 (uplink). • 2*1000Mbps SFP (uplink) (combo). • PoE Power Consumption Port 1-2=60W, Port 3-16=30W, Total=135W. • PoE Protocol IEEE802.3af, IEEE802.3at, Hi-PoE. • PoE/Hi-PoE PIN Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-). • Switching Capacity 7.2Gbps. • Packet Forwarding 5.3568 Mpps. • Packet Buffer Memory 4Mbit. • MAC Table Size 8K. • Application Humidity 10%~90%RH. • Power AC 100-240V. • Thunder Protection Common Mode 4KV. • Differential Mode 2KV. • ESD Protection Air discharge: 8 kV. • Contact discharge: 6 kV. • Working Temperature: -10°C~55°C. • Dimension(W×D×H) 440mm×300mm×44mm.

Product Overview DH-PFS3006-4GT-60 is an unmanaged Desktop Switch with 4 × 10/100/1000 Mbps PoE Ports. It provides 4 × 10/100/1000 Mbps Ethernet ports and 2 × 10/100/1000 Mbps uplink ports. The product is equipped with two types of transmission modes (Extend Mode On/ Extend Mode Off). It also supports PoE watchdog to avoid manually maintenance and device restart, which can realize the intelligent management and reduce the cost. The device is applicable for use in different scenarios, including home, office, server farm, and small mall. Features: • Intelligent PoE controls over power consumption and offers real-time monitoring. Supports ultra wide power supplies and is able to adapt to IPC power fluctuations. • Supports long distance PoE transmission. By dialing or enabling long-range transmission on the WEB interface, the transmission distance of a PoE port can be up to 250 m, meeting the requirements of wired transmission (bandwidth reduced to 10Mbps). • All-gigabit ports provide real-time transmisstion with no lag. • The orange port meets the IEEE 802.3af and IEEE 802.3at Hi-PoE standards, also supports a maximum power output of 60W for powering high-power devices. • Innovative PoE Watchdog can be switched on by dialing or turning on the WEB page switch. • MAC address list capacity is 2K. • Conform IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards. • Support PoE IEEE802.3af/ IEEE802.3at/ Hi-PoE standard. • Industrial wide temperature design. Technical Specifications: • Model PFS3210-8GT2GF-96. Ethernet Ports: • 410/100/1000Mbps RJ45 (PoE). • 210/100/1000Mbps RJ45 (uplink). • PoE Power Consumption Port 1=60W (Hi-PoE), Port 2-4=30W, Total=60W. • PoE Protocol IEEE802.3af/ IEEE802.3at/ Hi-PoE. • PoE/Hi-PoE PIN Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-). • Switching Capacity 14Gbps. • Packet Forwarding 8.928 Mbps. • Packet Buffer Memory 1Mbit. • MAC Table Size 2K. • Application Humidity 5%~95%RH. • Power input: DC 48V-57V. • Lighting Protection Common Mode 4KV. • Differential Mode 2KV. • ESD protection Air discharge: 8 kV. • Contact discharge: 6 kV. • Weight: 300 g. • Working Temperature: -10°C~55°C. • Dimension(W×D×H) 130mm×85mm×26mm. Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) - Load Capacity(W) - Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 100Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 100Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 100Mbps Bandwidth. 150m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. 200m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. 250m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

Product Overview PFS3210-8GT2GF-96 is an unmanaged Desktop PoE Switch with 8 × 10/100/1000Mbps PoE Ports. It provides 8 × 10/100/1000Mbps Ethernet ports, 2 × 1000M SFP. The product is equipped with two types of transmission modes (Extend Mode On/ Extend Mode Off). The red port supports the IEEE802.3bt and the Hi-PoE standards. The maximum power consumption is 90W. It alsosupports PoE watchdog to avoid manually maintenance and device restart, which can realize the intelligent management and reduce the cost. Suitable for small-scale scenes such as offices, schools, hotels, supermarkets, and hospitals. Features: • Intelligent PoE provides power consumption control and real-time monitoring to guarantee priority of power supply for important ports and prevent malfunctioning caused by power consumption change. Supports ultra wide power supply, able to adapt to IPC power fluctuation. • Supports long distance PoE transmission (up to 250 m, meeting the requirement of wired transmission (bandwidth reduced to 10Mbps). • All-gigabit ports provide real-time transmisstion with no lag. • The red port meets the IEEE 802.3bt and the Hi-PoE standards. • PoE watchdog monitors the status of terminals in real-time. • MAC address list capacity is 4K. • Conform IEEE802.3; IEEE802.3u; IEEE 802.3ab; IEEE802.3x standards. • Supports PoE IEEE 802.3af; IEEE 802.3at; Hi-PoE; IEEE 802.3bt standard. • Industrial wide temperature design. • Durable full-metal housing provides great heat dissipation. Technical Specifications: • Model PFS3210-8GT2GF-96. Ethernet Ports: • 810/100/1000Mbps Base-T (PoE). • Uplink 1-2: 210/100/1000Mbps Base-T (combo). • Uplink 1-2: 2*1000Mbps Base-X (combo). • PoE Power Consumption Port 1=90W, Port 2-8=30W, Total=96W. • PoE Protocol IEEE 802.3af; IEEE 802.3at; Hi-PoE; IEEE 802.3bt. • PoE/Hi-PoE PIN Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-). • Switching Capacity 20Gbps. • Packet Forwarding 14.88 Mpps. • Packet Buffer Memory 1.5Mbit. • MAC Table Size 4K. • Application Humidity 10%~90%RH. • Power supply: DC 53V / 1.81A. • Lighting Protection Common Mode 4KV. • Differential Mode 2KV. • Statics protection Air discharge: 8 kV. • Contact discharge: 6 kV. • Weight: 650 g. • Working Temperature: -10°C~55°C. • Dimension(W×D×H) 240mm×105mm×28mm. Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) - Load Capacity(W) - Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. 200m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. 250m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

PoE šakotuvas 16x 1000Mbps PoE portų, 2x SFP 1000Mbps, Total-190W Features: • 20-port managed gigabit switch with 16-port PoE. • Transmits data at a high speed through USB 3.0. • Layer 2 network management PoE switch. • Supports web, and network management software based on SNMP. • Network redundancy: STP/RSTP. • Supports PD alive mode. • The red ports support t IEEE802.3af, IEEE802.3at, IEEE802.3bt and the Hi-PoE standards, max 90W. • Intelligent PoE controls over power consumption and offers real-time monitoring. • Non-blocking video transmission due to large buffer memory. • Supports desktop-mount installation. • Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad standards. • Conforms to IEEE802.3af and IEEE802.3at power supply standard. Technical Specifications: • Model S4220-16GT-190. • Ethernet Port: 18x 10/100/1000Mbps, SFP 2x 1000Mbps; PoE ports: 16x 10/100/1000Mbps. • Ports 1-16: RJ45 10/100/1000 Mbps(PoE); Ports 17-18: RJ45 10/100/1000 Mbps; Ports 19-20: SFP 1000 Mbps. • PoE Power consumption: Full load = 190W, Idling: <20W; Port 1-2 = 90 W, Port 3-16 = 30 W. • Power consumption management: yes. • PoE PIN Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-). • Communication standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad. • PoE protocol: IEEE802.3af (PoE); IEEE802.3at (PoE+); Hi-PoE; IEEE802.3bt (PoE++). • Switching capacity: 56 Gbps. • Packet forwarding rate: 29.76 Mpps. • Packet buffer memory: 4.1 Mbit. • MAC Table size: 8K. • Jumbo Frame: 10K Byte. • VLAN Number: 4K. • VLAN Interface: 10. • Dynamic ARP: 512. • MTBF: 467125.73 hours. • Long distance PoE: 250 m long distance PoE transmission. • Spanning Tree Protocol: STP; RSTP. • Link Aggregation: Static link aggregation; LACP. • Multicast: IGMP Snooping. • DHCP Function: DHCP client; DHCP-Server; DHCP-Snooping. • Security: IEEE 802.1x ACL. • Equipment Management: WEB(http and https); Telnet; SNMP V1/V2C/V3. • Application humidity: 5%~95%. • Power supply: 48V - 57V DC. • Lightning Protection Common Mode: 4 kV. • Differential mode: 2 kV. • ESD Protection Air discharge: 8 kV. • Contact discharge: 6 kV. • Working temperature: -10°C~55°C. • Weight: 3.405 kg. • Dimensions(W×D×H): 440 mm × 300 mm × 44 mm. Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) - Load Capacity(W) - Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 200m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 250m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

10 portų valdomas šakotuvas su 8 portų PoE, 250m, 96W. Overview: Cloud Managed Switch is a layer-2 commercial switch that has a long-distance PoE function. It can supply power to devices up to 250 meters away. The PoE red port supplies up to 90W. The Switch can be managed through the DoLynk Care app, allowing you access to the network topology diagram function, which can be used to quickly identify issues. The DoLynk Care app is developed based on DoLynk Care Cloud Server. The Switch is applicable for use in a wide variety of scenarios, such as in homes, factories and offices. Model: S4100-8ET2GT-96-C. Functions: Supports LLDP protocol and automatically generating the network topology to quickly identify issues. Cloud Management: You can operate and maintain the switch on the app of the mobile terminal, greatly reducing the cost of operation and maintenance. The transmission distance of a PoE port can be up to 250 m, meeting the requirement of wired transmission (bandwidth reduced to 10Mbps). · Supports visualized management and remote maintenance. · Supports automatic network topology generation. · 250 m long-distance power supply. · 8-pin PoE offers better compatibility and reduces cable loss. · PoE watchdog monitors the status of terminals in real-time. · Supports the power management policy. Red Port 90W: The red ports support IEEE802.3af, IEEE802.3at, IEEE802.3bt and Hi-PoE standards, with a maximum output power consumption of 90W per port. Suitable for powering high-power devices. PoE Watchdog: It enables the switch to automatically detect port status and restart the failed ports to recover connection in case of IPC connection exception. This enables intelligent operation and maintenance management in its true sense and effectively reduces manual maintenance costs. Technical Specification: Included Power Adapter: Yes. PoE: Yes. Ethernet Port: 8. Ethernet Port Speed 10/100 Mbps. Optical Port Uplink Speed: 10/100/1000 Mbps. Description of Function Slots: Port 1–8: 8 × RJ–45 10/100 Mbps; Uplink1–2: 2 × RJ–45 10/100/1000 Mbps. Power Supply: 53 VDC, 1.81 A. Operating Temperature: –10°C to +55°C. Operating Humidity: 5%–95% (RH), non-condensing. Storage Temperature –40°C to +70°C. Storage Humidity 5%–95% (RH), non-condensing. Power Consumption Idling: <5 W, Full: 96 W. Smart Managed Switch: yes. MTBF: 864,663 h. Switching Capacity: 7.2 Gbps. Packet Forwarding Rate: 4.17 Mpps. Packet Buffer Size: 4 Mbit. MAC Table Size: 16K. PoE Protocol: IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt. Communication Standard: IEEE 802.3; IEEE 802.3u; IEEE 802.3X; IEEE 802.3ab. PoE Power: Port 1 <90 W; Port 2–8 <30 W; Total <96 W. PoE Power Consumption Management: Yes. PoE Pin Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8(V–). Long Distance PoE Transmission: Yes. Statics Protection: Air discharge: 8 kV; Contact discharge: 6 kV. Lighting Protection: Common mode: 4 kV; Differential mode: 2 kV. Weight: 0.5 kg. Product Dimensions: 190 mm × 100 mm × 30 mm. Certifications CE; FCC. Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) Load Capacity(W) Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 100Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 100Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 100Mbps Bandwidth. 150m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 200m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 250m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

6 portų valdomas šakotuvas su 4 portų PoE, 250m, 60W. Overview: Cloud Managed Switch is a layer-2 commercial switch that has a long-distance PoE function. It can supply power to devices up to 250 meters away. The PoE red port supplies up to 60W. The Switch can be managed through the DoLynk Care app, allowing you access to the network topology diagram function, which can be used to quickly identify issues. The DoLynk Care app is developed based on DoLynk Care Cloud Server. The Switch is applicable for use in a wide variety of scenarios, such as in homes, factories and offices. Model: S4100-4GT2GT-60-C. Functions: Supports LLDP protocol and automatically generating the network topology to quickly identify issues. Cloud Management: You can operate and maintain the switch on the app of the mobile terminal, greatly reducing the cost of operation and maintenance. The transmission distance of a PoE port can be up to 250 m, meeting the requirement of wired transmission (bandwidth reduced to 10Mbps). · Supports visualized management and remote maintenance. · Supports automatic network topology generation. · 250 m long-distance power supply. · 8-pin PoE offers better compatibility and reduces cable loss. · PoE watchdog monitors the status of terminals in real-time. · Supports the power management policy. Red Port 60W: The red ports support IEEE802.3af, IEEE802.3at, IEEE802.3bt and Hi-PoE standards, with a maximum output power consumption of 60W per port. Suitable for powering high-power devices. PoE Watchdog: It enables the switch to automatically detect port status and restart the failed ports to recover connection in case of IPC connection exception. This enables intelligent operation and maintenance management in its true sense and effectively reduces manual maintenance costs. Technical Specification: Included Power Adapter: Yes. PoE: Yes. Ethernet Port: 4. Ethernet Port Speed 10/100/1000 Mbps. Optical Port Uplink Speed: 10/100/1000 Mbps. Description of Function Slots: Port 1–4: 4 × RJ–45 10/100/1000 Mbps; Uplink1–2: 2 × RJ–45 10/100/1000 Mbps. Power Supply: 53 VDC, 1.226 A. Operating Temperature: –10°C to +55°C. Operating Humidity: 5%–95% (RH), non-condensing. Storage Temperature –40°C to +70°C. Storage Humidity 5%–95% (RH), non-condensing. Power Consumption Idling: <5 W, Full: 60 W. Smart Managed Switch: yes. MTBF: 93.24 years. Switching Capacity: 12 Gbps. Packet Forwarding Rate: 8.93 Mpps. Packet Buffer Size: 1 Mbit. MAC Table Size: 2K. PoE Protocol: IEEE802.3af; IEEE802.3at; Hi-PoE. Communication Standard: IEEE 802.3; IEEE 802.3u; IEEE 802.3X; IEEE 802.3ab. PoE Power: Port 1 <60 W; Port 2–8 <30 W; Total <60 W. PoE Power Consumption Management: Yes. PoE Pin Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8(V–). Long Distance PoE Transmission: Yes. Statics Protection: Air discharge: 8 kV; Contact discharge: 6 kV. Lighting Protection: Common mode: 4 kV; Differential mode: 2 kV. Weight: 0.3 kg. Product Dimensions: 130 mm × 85 mm × 26 mm. Certifications CE; FCC. Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) Load Capacity(W) Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 100Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 100Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 100Mbps Bandwidth. 150m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 200m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 250m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

26 portų valdomas šakotuvas su 24 portų PoE, 250m, max 360W, modelis S4101-24ET2GF-360-C. Overview: Cloud Managed Switch is a layer-2 commercial switch that has a long-distance PoE function. It can supply power to devices up to 250 meters away. The PoE red port supplies up to 90W. The Switch can be managed through the DoLynk Care app, allowing you access to the network topology diagram function, which can be used to quickly identify issues. The DoLynk Care app is developed based on DoLynk Care Cloud Server. The Switch is applicable for use in a wide variety of scenarios, such as in homes, factories and offices. Model: S4101-24ET2GF-360-C. Functions: Supports LLDP protocol and automatically generating the network topology to quickly identify issues. Cloud Management: You can operate and maintain the switch on the app of the mobile terminal, greatly reducing the cost of operation and maintenance. The transmission distance of a PoE port can be up to 250 m, meeting the requirement of wired transmission (bandwidth reduced to 10Mbps). · Supports visualized management and remote maintenance. · Supports automatic network topology generation. · 250 m long-distance power supply. · 8-pin PoE offers better compatibility and reduces cable loss. · PoE watchdog monitors the status of terminals in real-time. · Supports the power management policy. Red Port 90W: The red ports support IEEE802.3af, IEEE802.3at, IEEE802.3bt and Hi-PoE standards, with a maximum output power consumption of 90W per port. Suitable for powering high-power devices. PoE Watchdog: It enables the switch to automatically detect port status and restart the failed ports to recover connection in case of IPC connection exception. This enables intelligent operation and maintenance management in its true sense and effectively reduces manual maintenance costs. Technical Specification: Included Power Adapter: Yes. PoE: Yes. Ethernet Port: 24. Ethernet Port Speed 10/100 Mbps. Optical Port Uplink Speed: 1 Gbps. Description of Function Slots: Port 1-24: 24 × 10M/100M Base-T (PoE); Port 25-26: 2 × 10M/100M/1000M Base-T (uplink)(combo); Port 25-26: 2 × 1000M SFP (uplink)(combo). Power Supply: 100–240 VAC, 50/60 Hz, 2 A. Operating Temperature: –10°C to +55°C. Operating Humidity: 5%–95% (RH), non-condensing. Storage Temperature –40°C to +70°C. Storage Humidity 5%–95% (RH), non-condensing. Power Consumption Idling: <5 W, Full: 360 W. MTBF: 337,713 h. Switching Capacity: 8.8 Gbps. Packet Forwarding Rate: 6.54 Mpps. Packet Buffer Size: 4 Mbit. MAC Table Size: 16K. PoE Protocol: IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt. PoE Power: Port 1–2 <90 W; Port 3–24 <30 W; Total <360 W. PoE Power Consumption Management: Yes. PoE Pin Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8(V–). Long Distance PoE Transmission: Yes. Statics Protection: Air discharge: 8 kV; Contact discharge: 6 kV. Lighting Protection: Common mode: 4 kV; Differential mode: 2 kV. Weight: 3.50 kg. Product Dimensions: 440 mm × 300 mm × 44 mm. Certifications CE; FCC. Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) Load Capacity(W) Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 100Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 100Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 100Mbps Bandwidth. 150m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 200m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 250m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

PoE šakotuvas 8*1000Mbps PoE portai, Total-96W, BT 90W Features: • 8-port unmanaged switch with 8-port PoE. • All-giga ports with large buffer memory, enabling high-definition access of large stream. • Long distance PoE: By dialing or enabling long-range transmission on the WEB interface, the transmission distance of a PoE port can be up to 250 m, meeting the requirements of wired transmission (bandwidth reduced to 10Mbps). • 8-pin simultaneous PoE power supply (1/2/4/5 positive, 3/6/7/8 negative). Signal lines and idle lines supply power at the same time. • The red ports support IEEE802.3af, IEEE802.3at, IEEE802.3bt and Hi-PoE standards, with a maximum output power consumption rate of 90W per port. Suitable for powering high-power devices. • Intelligent PoE controls over power consumption and offers real-time monitoring. • Innovative PoE Watchdog can be switched on by dialing or turning on the WEB page switch. • Supports desktop-mount installation. • Supports IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az standards. • Conforms to IEEE802.3af and IEEE802.3at power supply standard. Technical Specifications: • Model PFS3008-8GT-96. • PoE ports: 8x 10/100/1000Mbps. • PoE Power consumption: Full load = 96W, Idling: 3W. • Power consumption management: yes. • PoE PIN Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-). • Communication standards: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE802.3az; IEEE802.3ab. • PoE protocol: IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt. • Switching capacity: 20 Gbps. • Packet forwarding rate: 11.9 Mpps. • Packet buffer memory: 1.5 Mbit. • MAC Table size: 8K. • Long distance PoE: 250 m long distance PoE transmission. • Application humidity: 5%~95%. • Power supply: 48V - 57V DC. • Thunder Protection Common Mode: 2 kV. • Differential mode: 0.5 kV. • Statics Protection Air discharge: 8 kV. • Contact discharge: 6 kV. • Working temperature: -10°C~55°C. • Weight: 490 g. • Dimensions(W×D×H): 190 mm × 100 mm × 30 mm. Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) - Load Capacity(W) - Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. 200m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. 250m Cable; 25.5W Load Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

Features: • 10-port economical gigabit switch with 8-port PoE. • 8-pin simultaneous PoE power supply (1/2/4/5 positive, 3/6/7/8 negative). Signal lines and idle lines supply power at the same time. • Compatibility with IPC is enhanced. Cable loss is reduced. Loading capacity is increased. • Unmanaged gigabit PoE switch. • Plug-and-play, no configuration required. • Supports desktop-mount installation. • Supports IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards. • Conforms to IEEE802.3af and IEEE802.3at power supply standard. Technical Specifications: • Model PFS3010-8GT-65. • Ethernet Port: 8x 10/100/1000Mbps, Uplink 2x 10/100/1000Mbps; PoE ports: 8x 10/100/1000Mbps. • PoE Power Consumption: Port 1-8 = 30W, Total = 65W, Idling: 1.8W. • PoE PIN Assignment 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-). • Communication standards: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE802.3ab. • PoE protocol: IEEE802.3af, IEEE802.3at. • Switching capacity: 20 Gbps. • Packet forwarding rate: 14.88 Mpps. • Packet buffer memory: 2 Mbit. • MAC Table size: 2K Byte. • Long distance PoE transmission: no. • ePoE: no. • Application humidity: 5%~95%. • Power: Built-in power supply: 100–240 V AC; 50/60 Hz; 1.5 A max. • Lightning Protection Common Mode: 2 kV. • Differential mode: 0.5 kV. • ESD Protection Air discharge: 8 kV. • Contact discharge: 6 kV. • Working temperature: -10°C~55°C. • Casing material: iron. • Weight: 0.8 kg. • Dimensions(W×D×H): 243 mm × 118 mm × 35 mm.

Features: • 10-port unmanaged gigabit switch with 8-port PoE. • 8-pin simultaneous PoE power supply (1/2/4/5 positive, 3/6/7/8 negative). Signal lines and idle lines supply power at the same time. • Compatibility with IPC is enhanced. Cable loss is reduced. Loading capacity is increased. • 2 types of transmission modes (Extend Mode On/ Extend Mode Off). • The red port supports the IEEE802.3bt and the Hi-PoE standards, max 90W. • Intelligent PoE controls over power consumption and offers real-time monitoring. • Innovative PoE Watchdog can be switched on by dialing or turning on the WEB page switch. • Supports desktop-mount installation. • Supports IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards. • Conforms to IEEE802.3af and IEEE802.3at power supply standard. Technical Specifications: • Model PFS3010-8GT-96. • Ethernet Port: 8x 10/100/1000Mbps, Uplink 2x 10/100/1000Mbps; PoE ports: 8x 10/100/1000Mbps. • PoE Power consumption: Full load = 96W, Idling: 3W. • Power consumption management: yes. • PoE PIN Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-). • Communication standards: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE802.3ab. • PoE protocol: IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt. • Switching capacity: 20 Gbps. • Packet forwarding rate: 14.88 Mpps. • Packet buffer memory: 1.5 Mbit. • MAC Table size: 4K. • Long distance PoE: 250 m long distance PoE transmission. • Application humidity: 5%~95%. • Power supply: 48V - 57V DC. • Lightning Protection Common Mode: 4 kV. • Differential mode: 2 kV. • ESD Protection Air discharge: 8 kV. • Contact discharge: 6 kV. • Working temperature: -10°C~55°C. • Weight: 0.5 kg. • Dimensions(W×D×H): 190 mm × 100 mm × 30 mm. Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) - Load Capacity(W) - Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 1000Mbps Bandwidth. 150m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 200m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 250m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

Overview: Cloud Managed Switch is a layer-2 commercial switch that has a long-distance PoE function. It can supply power to devices up to 250 meters away. The PoE red port supplies up to 90W. The Switch can be managed through the DoLynk Care app, allowing you access to the network topology diagram function, which can be used to quickly identify issues. The DoLynk Care app is developed based on DoLynk Care Cloud Server. The Switch is applicable for use in a wide variety of scenarios, such as in homes, factories and offices. S4101-16ET2GF-240-C Functions: Supports LLDP protocol and automatically generating the network topology to quickly identify issues. Cloud Management: You can operate and maintain the switch on the app of the mobile terminal, greatly reducing the cost of operation and maintenance. The transmission distance of a PoE port can be up to 250 m, meeting the requirement of wired transmission (bandwidth reduced to 10Mbps). · Supports visualized management and remote maintenance. · Supports automatic network topology generation. · 250 m long-distance power supply. · 8-pin PoE offers better compatibility and reduces cable loss. · PoE watchdog monitors the status of terminals in real-time. · Supports the power management policy. Red Port 90W: The red ports support IEEE802.3af, IEEE802.3at, IEEE802.3bt and Hi-PoE standards, with a maximum output power consumption of 90W per port. Suitable for powering high-power devices. PoE Watchdog: It enables the switch to automatically detect port status and restart the failed ports to recover connection in case of IPC connection exception. This enables intelligent operation and maintenance management in its true sense and effectively reduces manual maintenance costs. Technical Specification: Included Power Adapter: Yes PoE: Yes Ethernet Port: 16 Ethernet Port Speed 10/100 Mbps Optical Port Uplink Speed: 1 Gbps Description of Function Slots: Port 1–16: 16 × RJ–45 10/100 Mbps; Port 17-18: 2 × 10M/100M/1000M Base-T (uplink)(combo); Port 17-18: 2 × 1000M SFP (uplink)(combo) Power Supply: 100–240 VAC, 50/60 Hz, 2 A Operating Temperature: –10 °C to +55 °C Operating Humidity: 5%–95% (RH), non-condensing Storage Temperature –40 °C to +70 °C Storage Humidity 5%–95% (RH), non-condensing Power Consumption Idling: <5 W,Full: 240 W Smart Managed Switch: Yes MTBF: 371,069 h Switching Capacity: 7.2 Gbps Packet Forwarding Rate: 5.36 Mpps Packet Buffer Size: 4 Mbit MAC Table Size: 16K PoE Protocol: IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt PoE Power: Port 1–2 <90 W; Port 3–16 <30 W; Total <240 W PoE Power Consumption Management: Yes PoE Pin Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8(V–) Long Distance PoE Transmission: Yes Statics Protection: Air discharge: 8 kV; Contact discharge: 6 kV Lighting Protection: Common mode: 4 kV; Differential mode: 2 kV Weight: 3.20 kg Product Dimensions: 440 mm × 300 mm × 44 mm Certifications CE; FCC Transmission Performance: Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10ohm/100m Cable(m) Load Capacity(W) Bandwidth(Mbps) IEEE802.3bt 90W: 100m Cable; 71.3W Load Capacity; 100Mbps Bandwidth. 150m Cable; 62W Load Capacity; 10Mbps Bandwidth. 200m Cable; 51W Load Capacity; 10Mbps Bandwidth. 250m Cable; 40W Load Capacity; 10Mbps Bandwidth. Hi-PoE 60W: 100m Cable; 53W Load Capacity; 100Mbps Bandwidth. 150m Cable; 50W Load Capacity; 10Mbps Bandwidth. 200m Cable; 47W Load Capacity; 10Mbps Bandwidth. 250m Cable; 37W Load Capacity; 10Mbps Bandwidth. IEEE802.3at 30W: 100m Cable; 25.5W Load Capacity; 100Mbps Bandwidth. 150m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 200m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. 250m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth. Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

Features: • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE • Up to 8 ports of IEEE 802.3af/802.3at devices powered • Supports PoE Power up to 30.8 watts for each PoE port • Each port supports 52V DC power to PoE Powered Device • 120-watt PoE budget • Auto detects powered device (PD) • Circuit protection prevents power interference between ports • Remote power feeding up to 100m with standard mode, 250m with extended mode Switching • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X • Flow control for full duplex operation and back pressure for half duplex operation • IEEE 802.1Q VLAN transparency • Hardware DIP switch for “Standard”, “VLAN” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing Hardware • 12-inch desktop size, 1U height, rack mountable • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act • LCD monitor for system status and PoE usage status display • 1 silent fan to provide stable and efficient power performance • Support Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) Technical Specifications: • 10/100/1000BASE-T MDI/MDIX Ports 10 • PoE Injector Port 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8 • Switch Architecture Store-and-Forward • Switch Fabric 20Gbps/non-blocking • Switch Throughput@64 bytes 14.88Mpps@64Bytes • MAC Address Table 8K entries, automatic source address learning and aging • Maximum Frame Size 9K bytes • Flow Control IEEE 802.3x pause frame for full-duplex • Back pressure for half-duplex LED System: • Power (Green) • 10/100/1000BASE-T RJ45 Interfaces: • 10/100Mbps LNK/ACT (Orange) • 1000Mbps LNK/ACT ((Green) • PoE interfaces: • PoE-in-Use (Orange) LCD Monitor • PoE loading of each port • Total PoE power usage • Total PoE budget • System status, such as overload, low voltage, over voltage and high temperature DIP Switch • Selectable operation mode • Standard • VLAN • Extend + VLAN • Dimensions (W x D x H) 180 x 280 x 44 mm (1U height) • Enclosure Metal • Weight 1.8kg • Power Requirements AC 100~240V, 50/60Hz, 2.5A max. • Power Consumption/Dissipation Max. 135 watts/463.2 BTU • Thermal Fan 1 Power over Ethernet • PoE Standard IEEE 802.3af Power over Ethernet/PSE • IEEE 802.3at Power over Ethernet Plus/PSE • PoE Power Supply Type End-span • PoE Power Output Per port 52V DC, 600mA. max. 30 watts • Power Pin Assignment 1/2(+), 3/6(-) • PoE Power Budget 120 watts • Max. Number of Class 2 PDs 8 • Max. Number of Class 3 PDs 8 • Max. Number of Class 4 PDs 4 Standards Conformance • Regulatory Compliance FCC Part 15 Class A, CE • Standards Compliance IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab Gigabit 1000BASE-T • IEEE 802.3x Flow control and back pressure • IEEE 802.3af Power over Ethernet • IEEE 802.3at Power over Ethernet Plus • IEEE 802.3az Energy Efficient Ethernet (EEE) Environment • Operating Temperature: 0 ~ 50 degrees C • Relative Humidity: 5 ~ 95% (non-condensing) • Storage Temperature: -10 ~ 70 degrees C • Relative Humidity: 5 ~ 95% (non-condensing)

Bevielio tinklo ir Bluetooth4.2 USB adapteris, 650Mbps, Dual Band 2.4GHz, 5 GHz. Ypatybės: Patogaus dizaino, tik 14mm matomas iš USB lizdo, stabiliai integruojasi su nešiojamu kompiuteriu. USB jungtimi patogiai prijungiamas tiek prie stacionaraus, tiek prie nešiojamo kompiuterio. WiFi ryšio perdavimas: palaiko AP (Access Point) funkciją, gali teikti WiFi mobiliajam telefonui ar planšetei. Pagerina nešiojamojo kompiuterio signalo priėmimą: jei nešiojamasis kompiuteris blogai priima signalą arba sugadinta tinklo plokštė, šis adapteris gali jį patobulinti. Techniniai duomenys: Maksimalus duomenų perdavimo greitis: 650 Mb/s. Dažnis: Dual Band 2.4GHz arba 5GHz (5.8GHz), BT4.2. Perdavimo galia: 18dBm. Perdavimo sparta: 11b: 1Mbps/ 2Mbps/ 5.5Mbps/ 11Mbps. 11g: 6Mbps/ 9Mbps/ 12Mbps/ 18Mbps/ 24Mbps/ 36Mbps/ 48Mbps/ 54Mbps. 11n: 200Mbps. 11ac: 433Mbps. Šifravimo mechanizmai: WEP. WPA / WPA2. WPA-PSK / WPA2-PSK. Belaidžio WiFi ryšio standartai: IEEE802.11a. IEEE802.11ac. IEEE802.11b. IEEE802.11g. IEEE802.11n. Palaikomos operacinės sistemos: Windows 10 (32bit, 64bit), 8.1, 8, 7. Mac OS 10.6 - 10.15. Pastaba: Bluetooth tvarkyklė NĖRA suderinama su Windows XP/ Vista/ Mac OS. Jungtys: USB 2.0. Antena: built-in 2dBi. Spalva: juoda. Matmenys: 27x16x7mm. Komplektacija: „WiFi“+BT adapteris. CD tvarkyklės įdiegimui. Instrukcija. Garantija: 24 mėn.

Wi-Fi maršrutizatorius 2.4/5GHz, 1800Mbps Ypatybės: Wi-Fi 6 kartos 802.11AX standarto maršrutizatorius pasižymi didesniu pralaidumu ir sparta bei mažesnėmis elektros sąnaudomis. Tai idealus namų tinklo maršrutizatorius. Palaiko daugelio vartotojų, didelės aprėpties, mažo vėlavimo scenarijus. MU-MIMO+OFDMA technologija žymiai pagerina tinklo našumą ir efektyvumą, patenkina daugelio žaidėjų (multiplayer) internetinių žaidimų reikalavimus ir leidžia sklandžiai žiūrėti aukštos raiškos vaizdo įrašus. BSS technologija padeda kovoti su kaimynų Wi-Fi trukdžiais. Tinkamas Mesh tinklo prijungimui, siekiant sklandaus interneto ryšio visose patalpose. Palaiko Wi-Fi belaidžio ryšio standartus 802.11ax (Wi-Fi6), 802.11ac (Wi-Fi5), b/g/n (Wi-Fi4). Sparčiojo Etherneto prievadai 3x LAN ir 1x WAN. Duomenų perdavimo sparta siekia 1800Mbps. Komplektuojamas su maitinimo šaltiniu ir tinklo kabeliu. Techniniai duomenys: Maitinimo įtampa: 12V DC, 1.5A maitinimo adapteris. Lustai: MT7621A + MT7905D + MT7975D. CPU: 880MHz, dviejų branduolių. Atmintis: DDR 128MB; Flash: 16MB. Antenos: 4. LED indikatoriai: darbinės būsenos, Mesh tinklo, WAN, LAN, 5.8G, 2.4G. Mygtukai: WPS perkrovimo; Įjungimo/išjungimo; Mesh tinklo prijungimo. Saugumas: WPA3 autentiškumo patvirtinimas. Darbinė temperatūra: -10°C~+55°C. Darbinė drėgmė: 10-90%HR (nekondensuoja). Dydis: 210x135x185 mm. Ethernet: Prievadai: 1x WAN + 3x LAN. Duomenų perdavimo greitis: 10Mbps / 100Mbps / 1000Mbps. Wi-Fi: Belaidžio ryšio standartai: IEEE802.11AX, IEEE802.11AC, IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n. Maksimalus duomenų perdavimo greitis:1800Mbps. Dažnis: 2.4GHz (2.412-2.472GHz); 5GHz (5.180-5.825GHz). Perdavimo sparta: 2.4GHz - 574Mbps; 5.8GHz - 1201Mbps. Garantija: 24 mėn.

Bevielio tinklo ir Bluetooth 4.2 USB adapteris 2in1, 1300Mbps, Dual Band 2.4GHz, 5GHz. Ypatybės: USB jungtimi patogiai prijungiamas tiek prie stacionaraus, tiek prie nešiojamo kompiuterio. Pasižymi dideliu greičiu, stipriu signalu, Dual Band: 2.4GHz arba 5GHz. Stilingas dizainas, su LED indikatoriumi, antioksidacinė USB jungtis, neslidūs šonai, pirštų antspaudams atspari tekstūra. WiFi ryšio perdavimas: palaiko AP (Access Point) funkciją, gali teikti WiFi mobiliajam telefonui ar planšetei. Pagerina nešiojamojo kompiuterio signalo priėmimą: jei nešiojamasis kompiuteris blogai priima signalą arba sugadinta tinklo plokštė, šis adapteris gali jį patobulinti. Techniniai duomenys: Maksimalus duomenų perdavimo greitis: 1300 Mb/s. Dažnis: Dual Band 2.4GHz arba 5GHz (5.8GHz), BT4.2. Perdavimo galia: 18dBm. Perdavimo sparta: 11b: 1Mbps/ 2Mbps/ 5.5Mbps/ 11Mbps. 11g: 6Mbps/ 9Mbps/ 12Mbps/ 18Mbps/ 24Mbps/ 36Mbps/ 48Mbps/ 54Mbps. 11n: 400Mbps. 11ac: 867Mbps. Šifravimo mechanizmai: WEP. WPA / WPA2. WPA-PSK / WPA2-PSK. Belaidžio WiFi ryšio standartai: IEEE802.11a. IEEE802.11ac. IEEE802.11b. IEEE802.11g. IEEE802.11n. Palaikomos operacinės sistemos: Windows 10 (32bit, 64bit), 8.1, 8, 7. Mac OS 10.6 - 10.15. Pastaba: Bluetooth tvarkyklė NĖRA suderinama su Windows XP/ Vista/ MacOS. Jungtys: USB 2.0. Antena: smart system, built-in 2dBi. Spalva: mėlyna. Matmenys: 53x17x9mm. Komplektacija: „WiFi“+BT adapteris. CD tvarkyklės įdiegimui. Instrukcija. Garantija: 24 mėn.

CF-AX210-MBevielio tinklo plokštė nešiojamam kompiuteriui, Intel AX210, 3000Mbps Dual-Band ir 5374Mbps Tri-Band: 2.4GHz, 5GHz, 6Hz ir Bluetooth 5.2 adapteris. Ypatybės: Dual Band 3000Mbps, Tri-band 5374Mbps, 160MHz pralaidumas. Mikroschema pritaikyta naujos kartos Wi-Fi6E ir 802.11AX standartui. Užtikrina geresnį stabilumą, suderinamumą ir duomenų perdavimo spartą, tuo pačiu sumažindamas energijos suvartojimą ir tausodamas jūsų nešiojamąjį kompiuterį. Tinka didelės spartos naršymui internete ir žaidimams. Naujos kartos Bluetooth 5.2 pasižymi greičiu ir duomenų perdavimo sparta. Suderinamas su ankstesnėmis BT versijomis. Techninės savybės: Bendras duomenų perdavimo greitis: 3000(2974)Mb/s (dual-band); iki 5374Mb/s (tri-band). Dažnis: 2.4GHz, 5GHz/6GHz (2.412-2.484GHz, 5.180-5.825GHz). Pralaidumas: 20MHz/40MHz/80MHz/160MHz. Perdavimo galia: 19.5 dBm (Wi-Fi), 10dBm (BT). Bluetooth versija: 5.2. Perdavimo sparta: 2,4 GHz - 574 Mbps. 5.8GHz - 2400 Mbps. 6GHz - 2400 Mbps. Belaidžio WiFi ryšio standartai: IEEE802.11AX, IEEE802.11AC, IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n. Palaikoma sistema: Intel Windows 10 (64 bitų) sistema, Linux. Netinka MAC. Sąsaja: M.2. Antena: MU-MiMO. Matmenys: 30x22mm. Pakuotė: Wi-Fi ir BT adapteris. Instrukcija. Varžtelis tvirtinimui. Atsuktuvas. Garantija: 24 mėn.

WiFi signalo kartotuvas, 300Mbps, 2.4GHz, 2 antenų, sieninis. Ypatybės: 300Mbps WiFi kartotuvas padidina belaidžio tinklo aprėptį, išplėsdamas signalą ir pagerindamas jo kokybę dideliais atstumais, 360 laipsnių spinduliu, net sunkiai pasiekiamose vietose. Įmontuotas dvigubas (RTL8192E + RTK8192ER) Realtek mikroschemų rinkinys užtikrina stiprų procesoriaus signalą, pasižymi mažesne radiacija ir energijos sąnaudomis. Supaprastintas prijungimas (norint užmegzti ryšį, tiesiog paspauskite ir palaikykite 1-2 sek. maršrutizatoriaus WPS mygtuką ir spauskite taip pat 1-2 sek. kartotuvo WPS mygtuką). Miniatiūrinis dizainas su 2 išorinėmis (2x5dBi) antenomis, tinka standartinėms rozetėms, lengvai prisitaiko namų interjere. Belaidžio tinklo aprėptis priklauso nuo atstumo tarp kartotuvo ir maršrutizatoriaus, reguliuodami šį atstumą, galite valdyti ir WiFi signalo stiprumą. Keli darbo režimai: AP režimas, kartotuvo režimas (numatytasis), maršrutizatoriaus režimas. Techniniai duomenys: Maksimalus duomenų perdavimo greitis: 300Mb/s. Dažnis: 2.4GHz (2.412-2.4835GHz). Perdavimo galia: 15-18dBm. Perdavimo sparta: 2.4GHz - 300Mbps. Belaidžio WiFi ryšio standartai: IEEE802.11b, IEEE802.11g, IEEE802.11n.. Darbo aplinka: 10–40°C, 10–90%HR. Matmenys: 185x95x68mm. Kištuko tipas: europinis, C tipo. Įtampa: ~220-240V. Komplektacija: WiFi kartotuvas. Kabelis. Instrukcija. Garantija: 24 mėn.

Wi-Fi kartotuvas, 1200Mbps, 2.4G/5 GHz, 4 antenų, sieninis Ypatybės: 1200Mbps Wi-Fi kartotuvas padidina belaidžio tinklo aprėptį, išplėsdamas signalą ir pagerindamas jo kokybę dideliais atstumais, 360 laipsnių spinduliu, net sunkiai pasiekiamose vietose: 160 kv. metrų Wi-Fi aprėptis, net 4 sienų pralaidumo galimybė. Tinklo aprėptis priklauso nuo atstumo tarp kartotuvo ir maršrutizatoriaus, reguliuodami šį atstumą, galite valdyti ir Wi-Fi signalo stiprumą. 3 spalvų 3 LED indikatoriai parodo Wi-Fi tinklo signalo stiprumą ir padeda surasti optimalią vietą kartotuvo instaliavimui. Indikatorių lemputes galima išjungti, kad nešviestų nakties metu. Miniatiūrinis dizainas su keturiomis daugiakryptėmis (180 laipsnių kampu besisukančiomis) išorinėmis antenomis. Keli darbo režimai: AP režimas, kartotuvo režimas (numatytasis), maršrutizatoriaus režimas, kliento režimas laidiniu ryšiu. RJ-45 lizdas leidžia kabeliu perduoti Wi-Fi signalą nešiojamam ar stacionariam kompiuteriui. Aplinkai nekenksmingas - kartotuvas sukurtas griežtai laikantis elektromagnetinių standartų, kad būtų užtikrinta naudotojų sveikata ir saugumas, tinkamas šeimoms su kūdikiais. Šilumos išsklaidymo angos abiejose kartotuvo pusėse užtikrina sklandų ir ilgaamžį tarnavimą. Techninė specifikacija: Maks. duomenų perdavimo greitis: 1200Mb/s. Dažnis: 2.4GHz (2.412-2.472GHz); 5GHz (5.180-5.825GHz). Perdavimo sparta: 2.4GHz - 300Mbps; 5.8GHz - 867Mbps. Wi-Fi ryšio standartai: IEEE802.11ac, IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n. Šifravimas: WPA / WPA2; WPA-PSK / WPA2-PSK. Matmenys: 196x87x32mm. Įtampa: 220~240V. Darbinė temperatūra: -10°C~ +55°C. Darbinė drėgmė: 10%-90%RH. Garantija: 24 mėn.