Paieška

GNSS juosta: L1
IP klasė: IP65
Išmatavimai: 92.5 x 57.6 x 14 mm
Maitinimas: Vidinis 170 mAh Back-up, Išorinis 10-30 VDC
Paskirtis: Motociklams, Automobiliams
Tinklas: 2G
Tipas: Profesionalus

The Teltonika FMC920 is a small, smart 4G LTE Cat 1 vehicle GPS tracker with Bluetooth, an internal backup battery and configurable inputs/outputs - so it does far more than plain location tracking. It's hard-wired into the vehicle through a compact 5-pin cable, and its digital/analog I/O let you connect ignition sensing, an alarm or door sensor, a fuel-level (LLS) sensor, a relay to immobilise the engine, a buzzer or status LEDs. With a built-in accelerometer for crash detection and driver-behaviour (Green Driving) scenarios, it's a great fit for cars, motorcycles, light fleets, car rental and leasing. It is powered from the vehicle (10-30 V DC) and keeps reporting briefly on its internal battery if power is cut. Out of coverage, records are buffered in internal memory and uploaded once the connection returns - so no part of the route is lost. Why choose the FMC920 Small but capable - one of Teltonika's most compact trackers, yet with full digital/analog I/O True 4G - LTE Cat 1 connectivity with automatic 2G fallback Configurable I/O - 1 digital input, 1 digital output and 1 analog input for ignition, sensors, relays, buzzers and more (see the wiring scheme below) Crash & driver behaviour - built-in accelerometer with crash detection, Green Driving and over-speeding scenarios Bluetooth 4.0 LE - add temperature / humidity sensors, an OBDII dongle or other BLE accessories Internal backup battery - keeps reporting briefly after a power cut; 128 MB memory buffers data out of coverage Remote management - firmware and settings over the air (FOTA), plus USB / Bluetooth configuration Note: the FMC920 is IP54 (dust-protected, splash-resistant) - designed for in-vehicle installation, not for permanent outdoor/wet exposure Key features 4G LTE Cat 1 (Quectel EG915U) with 2G GSM/GPRS fallback Multi-constellation GNSS - GPS, GLONASS, Galileo, BeiDou, QZSS, AGPS; 33-channel; -165 dBm; accuracy below 3 m Inputs / outputs: 1 digital input, 1 digital output (open collector, max 0.5 A), 1 analog input (0-30 V) 170 mAh Li-Ion internal backup battery; input 10-30 V DC with overvoltage protection Bluetooth 4.0 + LE Accelerometer; scenarios: Crash & Towing detection, Green Driving, Over-Speeding, Jamming / Unplug detection, Geofencing, Trip, GNSS Fuel Counter 128 MB internal memory; Micro-SIM; Micro-USB 2.0; 2 status LEDs FOTA Web management; Teltonika Configurator (USB / Bluetooth) and FMBT mobile app Find it by SMS Need a quick location check without opening an app? Text the command ggps to the tracker's phone number and it replies with the current date, time, speed and a clickable Google Maps link to the vehicle's position. Inputs / outputs and wiring The 5-pin cable carries power plus the configurable I/O - connect ignition detection, an alarm or door sensor, a relay/immobiliser, a fuel-level sensor, a buzzer or LEDs: Installation Insert the Micro-SIM, then wire the device to the vehicle: Open the cover and insert the Micro-SIM (PIN request disabled), cut-off corner pointing toward the slot. Wire the 5-pin cable: Pin 1 +10-30 V DC (red), Pin 2 ground (black); connect DIN1 (yellow), AIN1 (grey) and DOUT1 (white) as needed. Mount the device away from heat and moving parts; configure via Teltonika Configurator (USB / Bluetooth) or FOTA. Technical specifications Parameter Value Module Quectel EG915U-EU (with Teltonika TM2500) Technology LTE Cat 1 / GSM / GPRS / GNSS / Bluetooth 4G LTE bands (EU) B1, B3, B5, B7, B8, B20, B28 2G bands B2, B3, B5, B8 Data rates LTE: up to 10/5 Mbps (DL/UL); GPRS: up to 85.6 Kbps GNSS GPS, GLONASS, Galileo, BeiDou, QZSS, AGPS; 33-channel; -165 dBm; below 3 m Start time hot below 1 s / warm below 25 s / cold below 35 s Backup battery 170 mAh Li-Ion (0.63 Wh) Power input 10-30 V DC, overvoltage protection (3 A fuse) Inputs / outputs 1 digital in, 1 digital out (open collector, 0.5 A), 1 analog in (0-30 V) Bluetooth 4.0 + LE Sensors Accelerometer Memory 128 MB internal flash Dimensions / weight 79 x 43 x 12 mm / 54 g SIM / USB Micro-SIM / Micro-USB 2.0 Connector 5-pin cable Indicators 2 status LEDs Operating temperature 0 C to +40 C (with battery) / -40 C to +85 C (without) Ingress protection IP54 (dust-protected, splash-resistant - not waterproof) Certification CE / RED, E-Mark, ANATEL The full datasheet and quick manual are available in the Parsisiuntimui (downloads) section below.

The Teltonika FMC130 is a professional 4G LTE Cat 1 vehicle tracking terminal from Teltonika's advanced range, with fallback to 3G and 2G, multi-constellation GNSS, Bluetooth and a generous set of configurable inputs/outputs. It is hard-wired into the vehicle through a 2x6 (12-pin) socket and is built for serious fleet work: connect ignition sensing, an immobiliser relay, fuel-level (LLS) and temperature sensors, an iButton reader, a buzzer or status LEDs - and add a CAN adapter to read data straight from the vehicle bus on cars, trucks and special machinery. With a built-in accelerometer (crash, towing and Green Driving scenarios), a 170 mAh internal backup battery and 128 MB of memory that buffers records out of coverage, the FMC130 suits fleet management, car rental and leasing, taxi, public transport and logistics. Why choose the FMC130 Advanced, flexible I/O - 3 digital inputs, 3 digital outputs, 2 analog inputs, 1-Wire and a CAN-adapter input for rich vehicle integration (see the wiring scheme below) True 4G - LTE Cat 1 with automatic 3G and 2G fallback CAN data via adapter - read fuel, mileage and other bus data on compatible vehicles Driver behaviour & safety - accelerometer with crash detection, towing detection, Green Driving and over-speeding Bluetooth 4.0 LE - temperature/humidity sensors, OBDII dongle, iButton, barcode scanner and other BLE accessories 1-Wire - iButton authorisation and temperature sensors Internal backup battery - keeps reporting briefly after a power cut; 128 MB buffers data out of coverage Remote management - firmware and settings over the air (FOTA), plus USB / Bluetooth configuration Note: the FMC130 is IP41 (basic dust/drip protection) - designed for protected in-vehicle installation, not for exposed or wet mounting Key features 4G LTE Cat 1 (Quectel EC21) with 3G (UMTS/HSPA) and 2G (GSM/GPRS) fallback Multi-constellation GNSS - GPS, GLONASS, Galileo, BeiDou, QZSS, AGPS; 33-channel; -165 dBm; accuracy below 3 m Inputs / outputs: 3 digital inputs, 3 digital outputs (open collector, max 0.5 A), 2 analog inputs (0-30 V), 1 negative input, 2 impulse inputs, 1 CAN-adapter input, 1-Wire 170 mAh Li-Ion internal backup battery; input 10-30 V DC with overvoltage protection Bluetooth 4.0 + LE Accelerometer; scenarios: Crash & Towing detection, Green Driving, Over-Speeding, Jamming / Unplug detection, Immobilizer, iButton, Excessive Idling, Geofencing, Trip, GNSS Fuel Counter 128 MB internal memory; Micro-SIM + eSIM; Micro-USB 2.0; 2 status LEDs FOTA Web management; Teltonika Configurator (USB / Bluetooth) and FMBT mobile app Find it by SMS Need a quick location check without opening an app? Text the command ggps to the tracker's phone number and it replies with the current date, time, speed and a clickable Google Maps link to the vehicle's position. Inputs / outputs and wiring The 2x6 socket carries power plus the configurable I/O - connect ignition detection, an immobiliser relay, sensors, a buzzer, LEDs, a 1-Wire iButton/temperature sensor or a CAN adapter: Installation Insert the Micro-SIM and connect the battery, then wire the device to the vehicle: Open the cover, insert the Micro-SIM (PIN request disabled) and connect the internal battery. Wire the 2x6 socket: Pin 1 +10-30 V DC, Pin 7 ground; connect the digital/analog I/O, 1-Wire or CAN-adapter pins as your installation needs. Mount the device in a protected spot away from heat and moisture; configure via Teltonika Configurator (USB / Bluetooth) or FOTA. Technical specifications Parameter Value Module Quectel EC21 (with Teltonika TM2500) Technology LTE Cat 1 / 3G UMTS-HSPA / 2G GSM-GPRS / GNSS / Bluetooth 4G LTE bands B1, B2, B3, B4, B5, B7, B8, B20, B28, TDD B40 (module-dependent) 3G / 2G UMTS/HSPA + GSM/GPRS fallback Data rate LTE up to 10 Mbps DL / 5 Mbps UL GNSS GPS, GLONASS, Galileo, BeiDou, QZSS, AGPS; 33-channel; -165 dBm; below 3 m Start time hot below 1 s / warm below 25 s / cold below 35 s Backup battery 170 mAh Li-Ion, 3.7 V (0.63 Wh) Power input 10-30 V DC, overvoltage protection Inputs / outputs 3 digital in, 3 digital out (open collector, 0.5 A), 2 analog in (0-30 V), 1 negative in, 2 impulse in, 1 CAN-adapter in, 1-Wire Bluetooth 4.0 + LE Sensors Accelerometer Memory 128 MB internal flash Dimensions / weight 65 x 56.6 x 20.6 mm / 55 g SIM / USB Micro-SIM + eSIM / Micro-USB 2.0 Connector 2x6 socket (12-pin), hard-wired Indicators 2 status LEDs Operating temperature -40 C to +85 C (without battery) Ingress protection IP41 (basic dust/drip protection - not waterproof) The full datasheet and quick manual are available in the Parsisiuntimui (downloads) section below.

IP klasė: IP68
Išmatavimai: 62 x 54 x 20 mm
Maitinimas: Vidinis 1000 mAh, Išorinis USB-C
Paskirtis: Nešiojamas, Universalus
Tinklas: 4G
Tipas: Profesionalus

The Teltonika FMC880 is a compact, waterproof 4G LTE Cat 1 vehicle GPS tracker with a dual-band L1 + L5 GNSS receiver for superior positioning accuracy. Like the rest of Teltonika's easy-install range it connects directly to the car battery with a clamp ("U-type") cable, so a typical fit takes only a few minutes - no OBD port, no engineer. Its rugged IP65 housing suits discreet under-bonnet mounting, and a built-in accelerometer adds accurate crash detection. Ideal for light vehicles, motorcycles, courier/delivery fleets, rental & leasing and insurance telematics. It runs on vehicle power (10-30 V DC) and keeps reporting briefly on its internal backup battery if power is cut. Out of coverage, records are buffered in internal memory and uploaded once the connection returns - so no part of the route is lost. Why choose the FMC880 Best-in-class accuracy - dual-band L1 + L5 GNSS (GPS, GLONASS, Galileo, BeiDou) delivers below 1.5 m accuracy and a fast first fix, even among tall buildings True 4G - LTE Cat 1 connectivity with automatic 2G fallback Fast install - clamps straight onto the battery (red +, black -); ready in minutes Hidden and weatherproof - small IP65 case fits discreetly under the hood Crash detection - built-in accelerometer records an accurate crash trace No lost data - 128 MB internal memory buffers records out of coverage; 170 mAh backup battery keeps reporting briefly after power loss Expandable over Bluetooth 4.0 LE - add temperature / humidity sensors, beacons, an OBDII dongle and more Smart driving scenarios - Green Driving, over-speeding, idling, towing, unplug and jamming detection, geofencing Remote management - firmware and settings over the air (FOTA), plus USB / Bluetooth configuration Key features 4G LTE Cat 1 (Quectel EG915U + AG3335) with 2G GSM/GPRS fallback Dual-band L1 + L5 multi-constellation GNSS - GPS, GLONASS, Galileo, BeiDou; -165 dBm; accuracy below 1.5 m CEP; hot start under 1 s Direct-to-battery power (10-30 V DC, overvoltage protection) with a 170 mAh Li-Ion backup battery Accelerometer with crash trace Bluetooth 4.0 + LE for wireless sensors and accessories IP65 waterproof enclosure; wide -40 C to +85 C operating range 128 MB internal memory for offline record buffering Driving scenarios: Green Driving, Over-Speeding, Idling, Towing, Unplug, Jamming detection, Geofencing, Trip FOTA Web management; configurable via Teltonika Configurator (USB / Bluetooth) Find it by SMS Need a quick location check without opening an app? Text the command ggps to the tracker's phone number and it replies with the current date, time, speed and a clickable Google Maps link to the vehicle's position. Wiring The FMC880 uses a simple two-wire connection to the vehicle battery: VCC (red): power supply, +10-30 V DC GND (black): ground Installation Insert the Micro-SIM and connect the device to the battery, then mount it where it does not obstruct other components: Unscrew the 6 screws (counter-clockwise) and remove the cover. Insert the Micro-SIM (PIN request disabled), cut-off corner pointing toward the slot. Connect the battery / power as shown, positioning the cable so it does not obstruct other components. Re-attach the cover and screw it back in - the device is ready to be mounted. Technical specifications Parameter Value Module Quectel EG915U-EU with AG3335 Technology LTE Cat 1 / GSM / GPRS / GNSS / Bluetooth 4G LTE bands (EU) B1, B3, B5, B7, B8, B20, B28 2G bands B2, B3, B5, B8 Data rates LTE: up to 10/5 Mbps (DL/UL); GPRS: up to 85.6 Kbps GNSS Dual-band L1 + L5: GPS, GLONASS, Galileo, BeiDou; -165 dBm; below 1.5 m CEP Start time hot below 1 s / warm below 24 s / cold below 35 s Backup battery 170 mAh Li-Ion, 3.7 V Power input 10-30 V DC, overvoltage protection (3 A fuse) Bluetooth 4.0 + LE Sensors Accelerometer Memory 128 MB internal flash Dimensions / weight 92.5 x 57.6 x 14 mm / 63 g SIM / USB Micro-SIM / Micro-USB 2.0 Indicators 2 status LEDs Operating temperature -40 C to +85 C (without battery) Ingress protection IP65 Certification CE / RED, E-Mark, RCM, REACH, RoHS The full datasheet and quick manual are available in the Parsisiuntimui (downloads) section below.

The Teltonika CAN-CONTROL+IMMO is a CAN-bus adapter that connects a Teltonika FMB / FMC GPS tracker to a vehicle's CAN bus, letting the tracker both read CAN telemetry and send control commands back to the car. It wires directly into the vehicle's CAN lines, so remote door control and engine immobilising need no extra relays or aftermarket alarm system. It is the go-to solution for car-sharing, car-rental and corporate fleets, where a user can lock or unlock the car and the operator can block the engine remotely. Note: the CAN-CONTROL is an accessory - it is not a standalone device and must be paired with a compatible Teltonika tracker (FMB1YX, FM36YX or FMB64X series). This is the +IMMO (engine block) variant - part code CANCONP5GH01 - which adds an engine immobiliser: block / unblock the engine over CAN, with no relay installation. What it can do Read from the vehicle (CAN telemetry): Odometer / driven distance, VIN, vehicle speed Fuel level, total fuel used, remaining range Engine RPM, engine temperature, handbrake status Door, lock and lights status Electric vehicles: battery level, charging status, charging-cable status, range Control the vehicle (commands over CAN): Central lock - remote door lock / unlock Engine block / unblock (immobiliser) - no relay installation required (IMMO option) Windows closure, turn-signal lights, trunk release Why choose it Direct CAN connection - no relays or aftermarket security wiring Lock/unlock + immobiliser built for car-sharing and rental fleets Rich telemetry - fuel, mileage, RPM, EV battery and more, straight from the bus Wide vehicle coverage - Teltonika's CAN database supports 1300+ vehicles and keeps growing Works with Teltonika FMB1YX / FM36YX / FMB64X trackers Available CAN data and control functions depend on the specific vehicle's make, model, type and year. Check your vehicle against Teltonika's supported-vehicle list (CAN-CONTROL IMMO) before installing. Professional installation is recommended. Technical specifications Parameter Value Type CAN-bus control adapter (car-sharing), variant CANCONP5GH01 (+IMMO, engine block) Supported trackers Teltonika FMB1YX, FM36YX, FMB64X series Connection Direct to vehicle CAN lines Input voltage 9-16 V DC Power consumption below 23.6 mA standby / below 23.5 mA working (at 12 V) Operating temperature -40 C to +85 C Operating humidity max 85% non-condensing Indicators 1 status LED Dimensions 51 x 36 x 16 mm Supported vehicles 1300+ (Teltonika CAN database, growing) Functions CAN data read + control (lock/unlock, windows, lights, trunk), engine immobiliser (IMMO, engine block/unblock) The full datasheet is available in the Parsisiuntimui (downloads) section below.

4G standard LTE Antenna connector type SMA/RP-SMA Antennas quantity 3 Auto MDI/MDI-X Yes Built-in processor Yes Certification CB Data network 2G, 3G, 4G Depth 74 Device type Cellular network router DMZ support Yes Ethernet LAN Yes Ethernet LAN (RJ-45) ports 2 Ethernet LAN data rates 10,100 Ethernet LAN interface type Fast Ethernet Firewall Yes Height 25 Housing material Aluminium, Plastic LED indicators LAN, Power Network address translation (NAT) Yes Networking standards IEEE 802.3, IEEE 802.3u Operating relative humidity (H-H) 10 - 90 Operating system installed RutOS Operating temperature (T-T) -40 - 75 Port forwarding Yes Power source type DC Processor frequency 0.58 Processor manufacturer MediaTek Product colour Black RAM capacity 0.128 RAM type DDR2 Reset button Yes Security algorithms AES-CCMP, TKIP, WEP, WPA-EAP, WPA-PSK, WPA2-Enterprise-PEAP, WPA2-PSK Short Message Service (SMS) Yes SIM card type MiniSIM Supported network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL) USB port No Web-based management Yes Weight 125 Wi-Fi Yes Wi-Fi standards 802.11b, 802.11g, Wi-Fi 4 (802.11n) Width 83 Tiekėjo specifikacijos Product code TELTONIKA RUT200 Brand TELTONIKA Supplier's product code TELTONIKA RUT200

TELTONIKA RUT550 LTE 4G Wifi maršrutizatorius su integruotu modemu. Kompaktiškas 4G/LTE ir 3G/UMTS maršrutizatorius su didelės spartos LTE ir DC-HSPA+. Užtikrina stabilų ir nuolatinį interneto teikimą - praradus LAN interneto ryšį, perjungiamas mobilusis 4G/3G interneto ryšys ir atvirkščiai. Papildomai RUT500 turi išorinę SMA antenos jungtį. Jei turite silpną 4G/3G ryšį, jį galite lengvai sustiprinti su papildoma 4G/3G antena. Greitis LTE tinke: atsisiuntimo greitis iki 100 Mbps, išsiuntimo iki 50 Mbps. Integruotas WiFi prieigos taškas, kuris palaiko naujausią IEEE802.11n ir IEEE802.11b / g WiFi standartą. Integruotas 10/100 Mbps 3-lizdas Ethernet. Techninė charakteristika: LTE downlink of up to 100Mbps LTE uplink of up to 50Mbps DC-HSPA+ downlink of up to 42Mbps DC-HSPA+ uplink of up to 5.76Mbps Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b wireless standards Complies with IEEE 802.3 and IEEE 802.3u standards Four Ethernet ports (3 x LAN, 1 x WAN) Durable aluminum housing External antennas (for LTE and Wifi) Integrated OpenVPN, IPSec and Dynamic DNS LTE/3G backup WAN function SMS reboot function DIN rail mounting inlcuded with router Wide input voltage range Power over Ethernet (LAN and WAN) ports (not compliant with IEEE 802.3af-2003) LTE/UMTS/GSM GSM/GPRS/EDGE 850/900/1800/1900 MHz Power Class 4 (2 W, 33 dBm) GSM/GPRS 850/900 MHz Power Class 1 (1 W, 30 dBm) GSM/GPRS 1800/1900 Mhz Power Class E2 (0.5 W, 27 dBm) for EDGE 850/900 MHz GPRS: 85.6 kbps DL/85.6 kbps UL (class 12) EDGE: 236.8 kbps DL/236.8 kbps UL (class 12) UMTS 850/900/1900/2100 MHz DC-HSPA+ mode: DL up to 43.2 Mbps, UL 5.76 Mbps HSPA+ mode: DL up to 21.6 Mbps, UL 5.76 Mbps UMTS mode: 384 kbps DL/384 kbps UL All bands with diversity LTE FDD 800/850/900/1800/1900/2100/2600 MHz Up to 100 Mbps downlink speed Up to 50 Mbps uplink speed All bands with diversity 3dBi LTE/UMTS/GMS antenna LAN and Wi-Fi Wireless AP, Router, 4-Port Switch and Firewall in one device High performance 320 MHz CPU with 256 Mbits SDRAM IEEE 802.11b/g/n, IEEE 802.3, IEEE 802.3u standards 64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods 3x LAN 10/100Mbps Ethernet ports 1x WAN 10/100Mbps Ethernet port Supports Auto MDI/MDIX Remote/local Web management 1x 5dBi wireless antenna SSID stealth mode and access control based over MAC address System log to record the status of the Router Auto negotiation/manual mode for IEEE 802.11b/g/n Dynamic DNS LAN access control over Internet connection Virtual server Auto wireless channel selection OpenVPN IPSec PPPoE Backup WAN SMS and Ping reboot Status via SMS 4 x LAN status LEDs Electrical, Mechanical & Environmental Dimensions (H x W x D) 100mm x 85mm x 36mm Weight 210g Power supply 100 – 240 VAC -> 9 VDC wall adapter Input voltage range 7 – 30VDC Power consumption < 7W Antenna connectors 2 x SMA for GSM/LTE, 1 x RP-SMA for Wi-Fi Indicators 4 x Ethernet LEDs, 1 x Power LED, 1 x GSM LED Operating temperature 0º to 50º C Storage temperature -20º to 70º C Operating humidity 10% to 90% Non-condensing Storage humidity 5% to 95% Non-condensing